[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[EP-tech] eprints3 migration with apache port change



Hi Herbert,

Also forgot to add you will probably want to run:

/opt/eprints3/bin/epadmin refresh_abstracts ARCHIVENAME

Regards

David Newman

On Mon, 2018-02-26 at 15:17 +0000, David R Newman wrote:
> Hi Herbert,
> 
> You will need to run at the following two commands, substituting
> ARCHIVENAME as appropriate and assuming your EPrints path is
> /opt/eprints3/:
> 
> /opt/eprints3/bin/generate_static ARCHIVENAME
> /opt/eprints3/bin/generate_views ARCHIVENAME
> 
> The second command may take a while to run depending on how many
> publications you have stored.
> 
> Regards
> 
> David Newman
> 
> 
> On Mon, 2018-02-26 at 15:58 +0100, Herbert Hrachovec wrote:
> > 
> > In migrating an existing eprints3 installation I have to change the
> > apache port from previously 8080 to 80. Alas, after successfully
> > getting the new site up all the information + record pages are
> > still
> > coded for the 8080 port.?
> > 
> > 
> > Could you please advise me how to fix this?
> > 
> > Thanks in advance,
> > 
> > h.h.?
> > 
> > ----
> > Hochschullehrer, Philosophie, Wien
> > *** Options: http://mailman.ecs.soton.ac.uk/mailman/listinfo/eprint
> > s-
> > tech
> > *** Archive: http://www.eprints.org/tech.php/
> > *** EPrints community wiki: http://wiki.eprints.org/
> > *** EPrints developers Forum: http://forum.eprints.org/
> *** Options: http://mailman.ecs.soton.ac.uk/mailman/listinfo/eprints-
> tech
> *** Archive: http://www.eprints.org/tech.php/
> *** EPrints community wiki: http://wiki.eprints.org/
> *** EPrints developers Forum: http://forum.eprints.org/